Sams elektronik doo

HDS-4

HD/SD SDI switcher 4x1

Catalogue page

User manual

Netfinder software

4x1 HD/SD SDI switcher
Vertical interval switching per SMPTE RP 168-1993
HD: 1.5Gb/s, SD: 540, 360, 270, 177, 143 Mb/s
All inputs are equalized
Reclocked outputs
EDH processing
Indication of presence of input signal and reference
Local or remote control
Control over ethernet

HDS-4 is a 4x1 HD/SD SDI switcher. Switcher input has an automatic equalization of signal which compensates length up to 100m of 1694A cable, an vertical interval switching by SMPTE RP 168-1993 standard. Also have EDH processor, reclocked signal to the output and LED detection of type of reference signal. Information on the vertical interval is obtained from external references (a condition that all signals are synchronous). This switcher is available in a 1RU 19" chassis. Control may be from the front panel or by remote control SCU-4. It can also be controlled via an Ethernet network through a web browser.

- Code: 002.001

- Weight: 1.5 Kg

- Type: 1RU rack frame

- Dimensions: 1RU x 19" x 100mm

- Required: remote control SCU-4

- Delivery includes: device, power corde, user manual

SDI INPUT

- Number: 4

- Connector: BNC

- Standards: SMPTE: 1.5GB/s, 540, 360, 270, 177, 143 Mb/s

- Impedance: 75Ω

- Signal level: 800mV ± 10%

- EQ: Automatic to 100m with Belden 1694A cable

SDI OUTPUT

- Number: 1, dual

- Connector: BNC

- Impedance: 75Ω

- Signal level: 800mV ± 10%

- Jitter: 0.2UI @ 100KHz

REFERENCE INPUT

- Number: 1

- Connector: BNC

- Signal: Black Burst 300mV, 3-level Sync

TCP-IP

- Number: 1

- Connector: 8P8C (RJ45)

POWER

- Voltage: ~230V AC ± 10%

- Power: 30W

- Frequency: 50Hz

- Overload protection: front Mounted Circuit Breaker

TEMPERATURE

- Performance: 5-40°C

- Operating: 0-50°C

- Notice: Technical and compliance specifications or any materials or information provided on this website as well as any printed product documentation are subject to change without notice.